You have come to the right place if you're looking for the best brass tumblers for reloading that fit your budget and have all the features you want. Our guide includes reviews of the best brass tumblers we could discover and a buying guide to help you figure out what you need and want in a brass tumbler.
You should regularly do firearm maintenance using a cleaning kit to keep your gun in the finest possible condition. Here's how to pick the best gun cleaning kit for you. Brass tumblers should be part of your armory if you want to take advantage of all the alternatives available for producing personalized ammo while also conserving money.
A pistol or any other gun is only as good as the ammo it can use. The Federal Premium .380 HST loads and the G2 Research Civic Duty .45 ACP are good examples. Reloading means cleaning the brass casings to improve the efficiency of your ammo, shoot properly and make them look like new. This is a must-do step if you want your bespoke rounds to be as safe and efficient as possible.
However, cleaning brass casings is time-consuming when cleaning each bullet individually. Brass tumblers are useful in this situation. You can clean a batch of brass casings inside the tumbler in only a few hours with a cleaning media like crushed walnut shells and some polishing powder, and you won't have to do any more labor.
What is the Purpose of a Brass Tumbler?
A brass tumbler rotates or vibrates a tray or tumbler barrel loaded with unclean shell casings and cleaning media like ground-up corncobs, walnut shells, or stainless-steel media. After a few hours of continuous use, the friction formed between the cleaning substance and the casings polishes and cleans the brass bullets.
The Best Brass Tumblers for Reloading
Buy on Amazon
1. Frankford Arsenal Quick-N-EZ 110V
- RELIABLE: Unique bowl design to increase brass agitation for...
- EASE OF USE: Clean lid for monitoring tumbling action with...
- CONVENIENT: Removes lube and oxidation quickly and...
- RELIABLE: Tumbler holds up to 600 9mm or 350 .223 cases
- SPECS: 110 Volts with 13.25 Liter Drum/Bowl Capacity
We recommend the Frankford Arsenal Quick-N-EZ rotary tumbler if you're on a budget but still want top-notch brass cleaning. It cleans brass sleeves quickly and easily, removing mud, fat, oxidation, and other contaminants. In addition, it's a vibratory tumbler that gets the job done without producing a lot of noise.
The device's loading section can accommodate 600 9mm cartridges and 350 .223 caliber rounds. It is suitable with corncobs and walnut shells when it comes to media cleansers. Special lubricating fillers for brass are advised for more efficient processing.
Image Credits: Frankford Arsenal
The design is quite practical and does not take up a lot of room. After unpacking and assembling it, you can immediately begin using it. The tumbler comes with a spinning media separation and a glass cover so you can keep an eye on your cases as they clean. Furthermore, it is constructed of durable steel that will last for many years.
2. Frankford Arsenal Platinum Series Rotary Tumbler
- SPECS: With a large 7-liter capacity this tumbler can clean...
- EASE OF USE: Features a maintenance-free drive train that...
- VERSATILITY: This tumbler can effectively clean without the...
- QUIET: This tumbler features a dual-layer drum with noise...
- CONVENIENT: Works great with Frankford Arsenal Stainless...
The Frankford Arsenal Platinum Series Rotary Tumbler raises the bar on brass cleaning. Apart from wet tumbling using stainless steel pins, the Frankford Arsenal Platinum Series rotary tumbler can also be used with dry media for dry tumbling.
For the Frankford Arsenal Platinum Series rotary tumblers, use a mixture of Dawn soap and Lemishine. When you pour unclean water away from the top, the soap maintains the media clean and prevents dirt from clinging to the cases and media. Lemishine aids in cleaning, but its main purpose is to help the brass dry quickly and without stains.
Image Credits: Frankford Arsenal
The Frankford Arsenal Platinum Series rotary brass tumbler's motor is extremely strong, but it is also extremely loud. You can fix the problem by storing it outside in a patio closet and closing the door.
3. Lyman Pro 1200 Tumbler 115V
- 115 Volt / Holds 2 pounds of Media
- Built in sifter lid for quick and easy media separation
- No need for separate media sifter
- Cleans up to 350 cases per cycle
- Sifter lid for quick and easy media separation
Lyman incorporates contemporary technology, including vibration technologies, in the construction of reloading equipment, enhancing the already great quality and practicality. The Lyman Pro 1200 Tumbler can clean 350 cases every cycle and handle up to 2 pounds of brass.
It has a built-in sifter lid for rapid media separation, eliminating the need for a separate media sifter. Fouling and oxidation are removed from used cartridge casings using the Turbo Pro 1200. Thanks to its thermally insulated electric motor, you may use the machine for as long as you wish without worrying about it overheating.
Image Credits: Lyman
The tumbler moves constantly and actively compared to the fully immersed cases due to the device's unique construction. Each sleeve is cleaned and polished using a high-speed, agitated action. As a result, you can view and assess the condition of the liners without interrupting the cleaning process.
4. Hornady M-1 Case Tumbler
- Hornady M-1 Case Tumbler – Add to the quality of your...
- Make Your Reloads Looks Like New – Coupled with Hornady...
- Large Capacity – The Hornady Case Tumbler has been...
- Quick and Efficient – Running time varies based on the...
- Case Care – Hornady cleaning, case care and prep tools...
The Hornady M-1 Case Tumbler was created with huge volumes of brass in mind. It has a capacity of 400.38 caliber cases. A sifter is also included for quick and easy media separation. Hornady's One-Shot Metal Polish delivers a gleaming finish when used with corn cob medium. You can also adjust the running time based on the condition of your brass casings.
Image Credits: Hornady
5. Lyman 7631550 Cyclone Rotary Tumbler 115V
- Great value: includes media sifter and 5lbs of stainless...
- Large capacity: holds up to 1000 pieces of 223 brass
- Less noise: features rubber lining to protect brass and...
- Better results: cleans better than Vibratory Tumbler designs
- Built in timer in the base can run from 0 to 3 hours
The Lyman cyclone rotary brass tumbler is one of our top picks for the best brass rotary tumbler because it includes two tumbling media and sifters. As a result, you don't have to purchase a sifter or media separately to get started.
Separating quarts from brass cases can be challenging at times. However, cleaning with stainless steel pins and water is quite effective, allowing users to save time. As a result, the Lyman cyclone tumbler comes with two sifters. While pouring everything through them, the cartridges remain on the first sifter, the pins on the second, and the water drains away.
Image Credits: Lyman
It has a good running time. It lasts between 0 and 3 hours. It is dependable, long-lasting, and high-performing. It's also a wet tumbler with stainless steel pins, so there's no reason you can't get started right away. This rotary tumbler is a terrific investment if you don't have any financial restraints.
Brass Tumbler Buying Guide
What is the most effective way to clean brass? When looking for a tumbler, vibratory and rotary tumblers are available. Each cleaning procedure has its own set of characteristics.
a) Rotary Tumblers
These types are relatively easy to operate and are frequently inexpensive. They enable you to load cases and turn on devices without paying much attention to them. In addition, the rotary tumbler can work without creating a lot of noise depending on the medium.
A rotary tumbler uses a revolving motion to polish brass. It is more expensive than vibratory tumblers and works with wet and dry media. It requires extra time and cleaning media when it comes to weak sides. Water users may experience leaks over time.
b) Vibratory Tumblers
Cases tumble through vibrations in a bowl containing media in this polishing apparatus. This is likely the most widely used cleaning method for empty brass pieces. They can deal with a huge number of situations quickly. Spending less money on media can help you save money.
A vibratory tumbler requires more care and can be fairly noisy. In terms of cost, it is more expensive than rotary devices. However, it works well with dry materials like walnut shells and maize cobs.
2. Cleaning Media
Cleaning brass cases also necessitates the use of specialized media. Not every tumbler will work with every one of them. When deciding whatever type of media to use, make sure it'll work with your tumbler and think about how dirty your brass is.
a) Walnut Shell
The walnut shell is what you need if you don't want to spend a lot of money on media. Walnut media is a relatively inexpensive substance that's also extremely easy to come by. It's similar to the bedding used in cages for small animals. In addition, a walnut shell comes in handy when dealing with rusted and ancient casings.
Instead of a simple cleaning, this medium can be abrasive and scratch new cartridges. If you want your brass casings to look gleaming, use crushed walnut shells, which work best with a vibrating tumbler. It is significantly smaller, causing it to soften. As a result, your cartridges will be polished.
Corncobs are a cost-effective but time-consuming approach to clean cases. They are softer and better at dealing with brass. The most significant downside is that you will have to deal with its dust. As a result, choosing a closed tumbler is preferable. Corncobs can also be used to clean brass without the use of water.
c) Stainless Steel Pins
If you're working with wet media, stainless steel pins are the way to go. Stainless steel pins are a fantastic media that can only be used in a rotary tumbler. Unfortunately, they also require water, and you must wash them with a cleaning chemical the second time you use them.
It's critical to dry up the tumbler and cases after tumbling. Stainless steel pins polish cases very well and makes them shine like new ones.
The brass tumbler's capacity depends on the amount of reloading you'll do. Tumblers that can carry 1000.223 cases each cycle are available. Choose a tumbler with that capacity if you want your brass cleaned quickly.
If you want to reload rounds by yourself, a smaller device may be better because it saves cleaning media money. If you don't have a lot of cartridge cases to polish, a tumbler that can handle 350 to 600 cases of .223 brass per cycle will suffice. If you have bigger batches, you can clean them over time.
Some of the tumbler types are made of plastic, while others are constructed of steel. The first material is less durable for long-term use, but it is less expensive. Steel tumblers will last you a long time.
The one to choose is mostly determined by how frequently you intend to utilize tumblers. If you'll be reloading in large quantities, ensure your brass tumbler is of great quality and will last a long time. We've included only the best tumbler brands in this article, so you're covered.
If you find a tumbler that can take 1000.223 cases, don't expect to clean a lot of 45 cases per load with it. While most brass tumblers can handle all case types, several brands handle specific cases better than others, so keep an eye out for those.
The number of loadable pieces decreases as the brass case size increases. Therefore, you should know what brass cases you will be dealing with before deciding.
If you're on a tight budget, a plastic tumbler is better than steel because it's less expensive. On the other hand, steel brass tumblers are expensive because they deliver years of high-quality results and performance.
Brass may be polished with both rotary and vibratory tumblers. Choose the most efficient brand for your needs once you've settled on the tumbler type.
Brass casings must be cleaned correctly, and it is best not to ignore them over time. Cleaning speed is influenced by several factors, including whether the tumbler is rotary or vibratory. The second type is a lot quicker.
Frequently Asked Questions(FAQs)
1. Is it Necessary for Me to Tumble My Brass?
If you don't tumble your brass, it won't affect the performance of your cartridges as long as they're clean and dry. On the other hand, tumbling your brass will save you a lot of time than cleaning it by hand. It also refreshes the appearance of your cases. Therefore, it's a worthwhile investment.
2. Is a Tumbler Required for Reloading?
Brass tumblers are not required for reloaded cartridges or special ammo. However, shells must be cleaned before reloading. Therefore enthusiasts look for the most cost- and time-effective method. Because brass tumblers are the most efficient way to clean a batch of casings, they are considered mandatory for anyone who plans to reload frequently.
3. Is it Possible to Tumble Brass for Too Long?
To buff out and clean brass to your satisfaction, tumble it for around two hours. Tumbling over an extended period will not harm non-plated brass, but it will harm nickel-plated brass and media. Get a brass tumbler with a timer to avoid this.
Featured Image Credits: www.ssusa.org